Annis Meters
Pocket-sized calibrated magnetometers giving an instant indication of the magnitude and polarity of residual magnetism in components after MPI.
BrochureSee more
Magazon EBU Extended Bench
The Magazon EBU is an extended magnetic particle testing bench for large parts that need high magnetising currents, supplied in Malaysia by Asia NDE.
Heavy-duty extended MPI bench with 3000A or 5000A outputs, PLC control and an extended working range for large components requiring substantial magnetising currents.
Overview
Key advantages
- A bigger version of the SBU bench, for long and heavy parts.
- 3 Series (3000A RMS) and 5 Series (5000A RMS) AC outputs.
- HWDC and single or 3-phase FWDC waveform options.
- Programmable Logic Controller (PLC) control system.
- Shared SBU control panel and dual digital ammeters (PEAK, RMS or 2xMEAN).
- FWDC demagnetisation by low frequency reversing polarity step-down.
- Extended working range built to customer requirements.
- Optional MagLink 2 computer control and dual footswitch operation.
Overview
The Magazon EBU offers testing for large components that require substantial magnetising currents. Like the SBU it has a stainless steel drain tank with grills (hardwood available), a fixed headstock and movable tailstock, and an integral power pack in a heavy duty steel cabinet on a fork-liftable plinth. Its extended bed and higher outputs make it the choice for long shafts, forgings and heavy aerospace and industrial parts.
Features
- Swinging field multi-directional magnetisation for single-shot inspection.
- Automatic sequencing of clamping, inking, magnetising and unclamping.
- Ink system for kerosene or water based inks with recirculating stainless reservoir.
- UV canopy and lamps for fluorescent inspection.
- Pneumatic clamping with 25mm stroke.
Key specifications
| Parameter | 3 Series | 5 Series |
|---|---|---|
| AC output (RMS) | 3000A | 5000A |
| AC output (peak) | 4200A | 7000A |
| Coil field (AC RMS) | 6000 A/T / 34 kA/m | 9000 A/T / 47 kA/m |
| Coil | 5 turn, 300 – 600mm ID | 5 turn, 300 – 600mm ID |
| Control | PLC | PLC |
More in Magnetic Particle Inspection
Custom MPI Benches
Bespoke Magazon-series magnetic particle inspection benches designed and built by Baugh & Weedon to suit specific component sizes, magnetising modes and production requirements.
BrochureSee more
Browse other categories
Eddy Current Flaw Detectors
Hand-held eddy current, ACFMT and bond testing flaw detectors, plus probes and reference standards.
Automated Inspection
Eddy current instruments and modules for integration into production lines and robotic systems.
Tube Inspection
Eddy current and flux leakage systems for heat exchanger, condenser and fin fan tubes.
Conductivity Meters
Eddy current conductivity meters for material sorting, heat treatment and damage verification.
Aircraft Wheel Inspection
Automated eddy current scanning systems for aircraft wheel shops.
Pulsed Eddy Current
Pulsed eddy current systems for corrosion under insulation, coatings and fireproofing.
Liquid Penetrant Inspection
Modular penetrant process lines and PFINDER penetrants, removers and developers.
Magnetic Flux Leakage
High-resolution MFL scanners for storage tank floor corrosion mapping.
Ultrasonic Testing
Thickness gauges, transducers, phased array probes, bond testers and automated UT systems.
Bond Testing
Multi-mode bond testers for disbond and delamination detection in composite, honeycomb and metallic bonded structures.
