WeldCheck2 / WeldCheck+
The WeldCheck2 and WeldCheck+ are eddy current flaw detectors for weld crack inspection, supplied in Malaysia by Asia NDE.
Single channel (WeldCheck2) and dual frequency (WeldCheck+) eddy current flaw detectors for weld inspection, designed to meet EN 1711 and ISO 17643.
Overview
Key advantages
- Meets EN 1711 & ISO 17643 “Eddy Current Examination of Welds by Complex Phase Analysis”.
- Advanced features including Loop, Guides and Automatic Lift-Off Gain Correction.
- Large, crisp, daylight readable display.
- User-friendly interface and ergonomic lightweight design.
- More than 8.5 hours battery life with rapid 2.5 hour charging.
- Left or right-handed operation with the “flip” function.
Overview
The WeldCheck2 is a single channel instrument with a simplified specification and a 10Hz – 20MHz frequency range. The WeldCheck+ is a dual frequency instrument (10Hz – 12.8MHz) with conductivity, able to perform applications that require dual frequency mixing. Both handle weld inspection, surface defect detection and low frequency inspection of non-ferrous material.
Built for the oilfield
Weighing 1.2kg, the WeldCheck series has a powder-coated aluminium alloy case with rubber feet, a fully-fitted protective boot, two moulded “Sure Grip” handles and an integral hand strap. Internally it is optimised to resist moist, tropical or salt-laden atmospheres. The daylight readable 14.5cm 640 x 480 colour screen supports spot, time-base, waterfall and meter displays, and over 500 readings can be stored – enough for an entire shift. An external AA battery pack adds a further 4 hours.
Probe connectors
Absolute, bridge and reflection probes connect through the industry standard 12-way LEMO connector, with a LEMO 00 connector for simpler connection of absolute probes.
More in Eddy Current Flaw Detectors
Browse other categories
Automated Inspection
Eddy current instruments and modules for integration into production lines and robotic systems.
Tube Inspection
Eddy current and flux leakage systems for heat exchanger, condenser and fin fan tubes.
Conductivity Meters
Eddy current conductivity meters for material sorting, heat treatment and damage verification.
Aircraft Wheel Inspection
Automated eddy current scanning systems for aircraft wheel shops.
Pulsed Eddy Current
Pulsed eddy current systems for corrosion under insulation, coatings and fireproofing.
Magnetic Particle Inspection
MPI benches, yokes, UV lamps, field strength and light meters, and MPI consumables.
Liquid Penetrant Inspection
Modular penetrant process lines and PFINDER penetrants, removers and developers.
Magnetic Flux Leakage
High-resolution MFL scanners for storage tank floor corrosion mapping.
Ultrasonic Testing
Thickness gauges, transducers, phased array probes, bond testers and automated UT systems.
Bond Testing
Multi-mode bond testers for disbond and delamination detection in composite, honeycomb and metallic bonded structures.
