ViCTor 2.2D
The ViCTor 2.2D is an eddy current instrument for automated crack detection on production lines, supplied in Malaysia by Asia NDE.
Two-probe automated eddy current instrument based on AeroCheck+ hardware, with configurable I/O, analogue outputs and 24V DC power for production line integration.
Overview
Key advantages
- Uses two probes simultaneously for more efficient inspection.
- Large bright LCD screen plus external VGA output.
- Includes rotary drive and conductivity.
- Configurable voltage-free I/O.
- USB or RS-232 remote control and real-time data streaming over USB.
- Dual analogue outputs for simple recording.
- Powered by 24V DC for easy integration into an industrial control system.
- DLL available for end-user software integration.
Overview
The ViCTor 2.2D is an automated eddy current instrument built on ETher NDE’s AeroCheck+ hardware. It uses the same screens as the AeroCheck+, so inspectors who know that instrument can use it straight away. A variety of case configurations offer maximum flexibility for each application.
Applications
- Surface defect detection
- Sub-surface defects in non-ferrous materials
- Heat treatment / material property verification
- Geometry sensing, such as thread presence and butt-weld detection
Eddy current suits automation of rotationally symmetric components such as bearings, piston (gudgeon) pins and cylinder liners: it is non-contacting, high speed (potentially up to 200m/s), needs no couplant and leaves no waste liquid.
Key specifications
| Parameter | Value |
|---|---|
| Probe connectors | 2 x 12-way LEMO 2B plus LEMO 00 |
| Gain | -18 to +82dB, independent per channel |
| Rotary | Probe 1, 600 – 3000 rpm |
| Alarms | 2 independent gates, box and sector |
| Display | 5.7” (145mm) daylight readable colour |
| Storage | Micro SD up to 32GB |
| Power | 24V DC |
More in Automated Inspection
Browse other categories
Eddy Current Flaw Detectors
Hand-held eddy current, ACFMT and bond testing flaw detectors, plus probes and reference standards.
Tube Inspection
Eddy current and flux leakage systems for heat exchanger, condenser and fin fan tubes.
Conductivity Meters
Eddy current conductivity meters for material sorting, heat treatment and damage verification.
Aircraft Wheel Inspection
Automated eddy current scanning systems for aircraft wheel shops.
Pulsed Eddy Current
Pulsed eddy current systems for corrosion under insulation, coatings and fireproofing.
Magnetic Particle Inspection
MPI benches, yokes, UV lamps, field strength and light meters, and MPI consumables.
Liquid Penetrant Inspection
Modular penetrant process lines and PFINDER penetrants, removers and developers.
Magnetic Flux Leakage
High-resolution MFL scanners for storage tank floor corrosion mapping.
Ultrasonic Testing
Thickness gauges, transducers, phased array probes, bond testers and automated UT systems.
Bond Testing
Multi-mode bond testers for disbond and delamination detection in composite, honeycomb and metallic bonded structures.
